Order a physical print:
- Source a local printing company that offers "UV print" on various materials. Recommended in the US: https://shopduggal.com/p/34/vibrachrome-metal-prints
- Choose UV printing direct on Matte White aluminium 3mm (also called Dibond or Alubond, Alupanel).
- The JPG source file must be printed at 100cm * 100cm scale (or 40x40 inches).
- Railing at the back is a convenient hanging option.

Hang the print on the wall:
- The vertical center of the print should be at average eyesight (1,60m).

------------------------------------------------

Source the video projector:
- You need a regular home video projector around 2000-3000 lumens, with hdmi input.

There are 3 options to position the projector, the choice of lens depends on this:
1- Projector on ceiling, far away. Long (4:1) or regular lens (2:1) with zoom, position is flexible, about 4m away from print.
2- Projector on ceiling or pedestal, close. Wide lens (0,5:1), projector should be about 1m from print.
3- Projector on ceiling or pedestal below the print: Super wide lens (0.3:1) very close, projector is just above or below print.

Ceiling or pedestal ?
- Projector should be rigged on ceiling just above the top edge of the print (2,10 - 2,50m)
- As an alternative projector can be setup on a pedestal (height around 1m)

------------------------------------------------

Setup the video projector

- Make sure the projection covers a little more than the entire print (adjust the zoom).
- The projection area should be as rectangular as possible to minimize distortion.
- Make sure the projection is sharp (adjust the focus).

------------------------------------------------


Setup the software / projection:
- Connect a computer (pc, mac or linux) to the projector with HDMI cable.
- Dezip the projection.zip archive.
- Open index.html in browser fullscreen (F11 in chrome).
- Left click to show the 4 red corners on white background.
- Drag each corner to the video to the corners of the print.
- Fine tune the corners until video matches perfectly.
- Right click to leave edit mode, the video starts on a black background.
- You may adjust/lower the projector's brightness (remote + menu) until the projection appears to be subtle.
- Your projection is ready.

- Additionally you can setup a startup shortcut to automate the html opening in fullscreen.